device_info.title

Device name(Device not connected)

Firmware version(Device not connected)

Firmware release date(Device not connected)

Connection speed(Device not connected)

RAKKA Keyboard Configurator is a web-based tool for configuring your RAKKA devices.

Version 2.10.2-r1239-d9a5dca
Build at 4/6/2025, 9:59:16 AM

Copyright © 2023 - 2025 RAKKA
All rights reserved.

Device

Config

Log

Firmware upgrade

Changelog

Key test

Dark mode

Light mode

Dark mode

Follow system

Theme

Preset

Pick a color

Language

English

한글

简体中文

繁體中文

About

Allow the browser to connect the device

Your browser should show a dialog below the address bar (as shown in the example). Click on the device name in the list to select the device and then click "Connect".

1. Click on the device name

2. Click "Connect"

Example

kb.rakka.cn wants to connect to a HID device

PomPomBoard
RAKKA 60
RAKKA 80 Edge

Connect to a new device

Demo mode

PomPomBoard

RAKKA 60

RAKKA 80 Edge

Explore the device's features and capabilities through demo mode without purchasing the device. Start now!

Using a USB Hub to connect devices may result in degraded performance or unstable connections.

Device nameStatusFirmware versionSerial numberLast connected

Profile configuration

Keymap

Actuation distance

Rapid Trigger

Swift Flow

Global configuration

Calibration

Debug

Layer

Standalone keymapWhen on, this profile has independent key mapping settings. When off, this profile uses the keymap settings of profile 1.

ComboTrigger the shortcut you want by a single tapA key combination is a combination of one or more modifier keys (e.g. Ctrl, Shift) and a regular key.

Tap HoldUnlock the full potentialTap and long presses correspond to different keys.

The keys for long presses can also be switching layer, which greatly expands the possibilities of the keyboard.

It takes time to determine if it's a press, triggering the "tap" key will be slower than a normal key. Enabling Rapid Trigger for this key and lowering the reset distance will improve it, but it is still not as good as a normal key.

Intermittent'ASASAS' rather than 'ASSSSSS'Simulate a long key press as intermittent key presses.

Config

Set to selected keys

Cancel

Automatically select layout options based on your installed keys.

If you change the installed keys, you will need to Retry auto choose.
If the detection is incorrect, you may need to select manually.

Auto choose

Retry auto choose

Please select the key you want to set the actuation distance first.

Please select the key you want to set the Rapid Trigger first.

Enable this combination

Swift Flow provides additional mechanisms to determine whether a key is triggered. First, Actuation distance or Rapid Trigger determines whether the key is pressed, and then Swift Flow determines whether the key should be triggered. Note that if the key matches the reset condition of Actuation distance or Rapid Trigger, the button will always be reset.

Set as selected keys

Priority

Depth priorityIf both keys are pressed, only trigger the key that pressed deeper.

Last input priorityOnly trigger the key that was pressed later.

Absolute priority (None)If None is pressed, None will never trigger no matter it is pressed or not.

NeutralIf both of the keys are pressed, trigger none of them.

Requires full cycle

If a triggered key is reset by this function, the key must first be released to the point where it is no longer considered pressed before it can be triggered by pressing it again.

Settings

Color

DarkerBrighter

Set color for selected keys

Middle-click to sample its color to the color picker.

Information

Device name(Device not connected)

Firmware version(Device not connected)

Firmware release date(Device not connected)

Connection speed(Device not connected)

To replace the switch yourself…

Hall Effect keyboards require the switches to be securely fixed on the PCB. Otherwise, it will lead to false triggers and resets.

Please ensure that the switches are firmly installed, and if necessary, disassemble the internal components to press them tightly into place.

DO NOT use plates made of soft materials or those with slots.

This is because newer switches usually have thinner pins, which will not fit securely into the holes on the PCB. With such plates, the switch will essentially be floating above the PCB, causing serious incorrect readings.

Auto calibration

Performs self-calibration continuously during operation to ensure stability and accuracy. This feature cannot be disabled.

Your firmware version is too low to support this feature.

Initialize automatic calibration

Attempt to avoid the impact of vibration

When a key is pressed and released, components such as the switch and keycap can generate vibrations (possibly exceeding 0.0x mm), especially under heavy keystrokes. Enabling this option may help mitigate key anomalies caused by such vibrations. However, it will impact the keyboard’s responsiveness (if you can press the key continuously with a extreme fast speed) and cannot guarantee complete prevention. Therefore, we recommend turning off this option and setting a reasonable trigger distance, rather than lowering the distance as much as possible and relying on this feature.

This option requires a newer version of the firmware.

Manual bottom calibration

After a key has been pressed with excessive force, it may behave abnormally when pressed with normal force. This can be avoided by recording manual calibration values.

Your firmware version is too low to support this feature. Please follow these steps:

If you have pressed the keys with excessive force, perform "Initialize automatic calibration" to clear automatically recorded bottom values.
If the key already has a calibration value, clear it first.
Press the key you wish to calibrate with normal force (no need to select them first). Try to keep it vertically downward during the pressing process.
Select the keys and click save.

Calibration values recorded previously will become invalid after changing the switch model. You need to redo this process.
Even with the same switch model, re-calibration is required to account for individual differences.

Save calibration values for selected keys

Clear saved calibration values for selected keys

Staying on this tab will affect performance.

Enable log

Enable log output. This is useful for debugging. Check the log in Devices - Logs. This option is disabled by default and is not saved in the device.

Reports whether the key is pressed

Allows the keyboard to report whether a key is considered to be pressed. Pressed keys are indicated by the visual above. This option is disabled by default and is not saved in the device.

Reset

Reset the configuration of the device to default. Please wait for about half a minute before unplugging the device to ensure the configuration is saved.

Reset

Reboot to Recovery Mode

Reboot the device into recovery mode. Normally, you don't need to use this. If triggered by mistake, simply reconnect the device to recover.

Reboot to Recovery Mode

Please connect to a device first

RAKKA Keyboard Configurator is ready to use offline

Calibrating…

Please do not touch the keys.

You are using an unsupported browser

RAKKA Keyboard Configurator is built using WebHID and some modern technologies, but unfortunately, the browser you are using does not support these technologies. Note that browsers such as FireFox, Safari, etc. are not supported as they do not support WebHID.

Supported browsers:

Google Chrome
Microsoft Edge
Other browsers based on Chromium 112 (March 29, 2023) (possibly supported)

You can also choose to continue exploring RAKKA Keyboard Configurator in order to understand its features. However, you may encounter problems with pages not displaying properly, and you may not be able to connect a keyboard properly.

Nuh uh

Configurator v2.10.2-r1239-d9a5dca

You May Not Be in Mainland ChinaIf you are not in Mainland China, please visit the global site for better access speed.The region is inferred locally based on your browser's language, time zone, and other information.

Visit the Global Site

Ignore

regional_site.dont_show_again